Recording Outbound Calls

Outbound call recording is configured on a per-device basis.

 

Before enabling call recording, please review our Call Recording Disclaimer.

 

To enable recording of inbound calls to a number:

  1. Log in to the VoIP Commander webApp.
  2. Click the Devices Tab
  3. Locate the device for which you would like the outbound call recorded and click the Edit button
  4. Tick the Record Outbound Calls box
  5. Click Save

 

Changes to this setting can take up to 15 minutes to take effect.

 

Calls will now be recorded and will be available on the Logs tab in VoIP Commander.

  • 2 Users Found This Useful
Was this answer helpful?

Related Articles

Send Destination Number on Inbound Calls

This option changes whether the dialled number is sent to the device or not.  This...

Local Area Dialling Prefix

When you dial an 8-digit phone number, the number you set here will be automatically prefixed to...

Porting Legislation Extract

Chapter 11, Part 2, Section 11.9 "(1) A carriage service provider or carrier that is...

Is outbound Caller ID supported Internationally?

Typically the answer is yes, however it is not guaranteed.   Caller ID sent from your...

Configuring a Speed Dial Button on the Cisco SPA500S

To configure a button on an SPA500S as a speed dial button, you will need the following...