Knowledgebase

IP PBX Systems that have been proven to work with Control Networks VoIP Service

We have numerous Partners that have successfully setup and are using Control Networks VoIP Services on the following IP PBX Systems:

 

3CX Phone System

 

3CX Phone System for Windows is a software-based IP PBX that replaces a proprietary hardware
PBX / PABX. 3CX’s IP PBX has been developed specifically for Microsoft Windows and is based on the SIP standard, making it easier to manage and allowing you to use any SIP phone (software or hardware).

 
  • 3 Users Found This Useful
Was this answer helpful?

Related Articles

Send Destination Number on Inbound Calls

This option changes whether the dialled number is sent to the device or not.  This...

Local Area Dialling Prefix

When you dial an 8-digit phone number, the number you set here will be automatically prefixed to...

Porting Legislation Extract

Chapter 11, Part 2, Section 11.9 "(1) A carriage service provider or carrier that is...

Is outbound Caller ID supported Internationally?

Typically the answer is yes, however it is not guaranteed.   Caller ID sent from your...

Configuring a Speed Dial Button on the Cisco SPA500S

To configure a button on an SPA500S as a speed dial button, you will need the following...