Configuring Yealink T22 for use with Control Networks Business VoIP

This general guide will provide you with the basic steps to configure your phone for use with Control Networks' VoIP system



It is important to note that phones vary widely in their setup methods and interfaces. While this guide is centred on Yealink phones, you will be able to find comparable options in your phone.

Accessing the setup interface

In order to register your phone with us, you need to set up your phone with our sever and authentication details.

On most phones, the easiest way to do this is via the web interface. Open the menu on your phone, navigate to 'Network', find 'IP Address' (it should look something like 192.168.0.111 or 10.0.0.1).

On your computer, open your web browser and navigate to this IP address. NB: Your computer must be on the same network as your phone for this to work.

Once the interface has loaded, enter the configuration mode by inputing the username and password. By default, username is "admin" and password is "admin" as well.

 

If your phone's interface is different, try to find something similar to the fields highlighted above.

If your phone does not support a web interface, you will have to do it from your phone's menu.

Account Settings

Line Active - Enabled

Server Host - pbxaas.neural.net.au
Port - 5060

Register Name - The login number of your extension (eg. 123456)
User Name - Same as above
Password - The password we've supplied for your extension

Your username and password for the extension will have been sent to you in an email. If you don't have this email, or are looking it up at a later date, you can find it in Control Networks VoIP Commander (VoIP.controlnetworks.com.au) by editing the desired device code on the Devices tab.

Alternatively, or if you haven't requested management access, please contact support on 03 9387 1666, option 2, or create a new support ticket by sending an email to ITHelpDesk.

 

Other settings

You may be able to configure various other settings, depending on your phone model.

Label - The name that shows on your phone's screen.  
Display name - This is what gets passed through to other extensions when you call them.

Important Note

These are the settings required to set up connection to the server and enable you to make calls. There are still plenty of customisation options available, including time zones, speed dial, etc. and can be found in various locations in the menus.

Control Networks ships any phones purchased from us fully configured, complete with your username/password. Please contact sales to find out more.

 


  • 8 Users Found This Useful
Was this answer helpful?

Related Articles

Asterisk Configuration Example - Direct IP

If you are using a direct-IP account for your SIP termination - simply use the configuration...

How many simultaneous calls can I send or receive?

Control Networks does not currently place any limitation on the number of inbound or outbound...

Bria for iPhone and Android - Manual Configuration

Please follow these steps to manually attach your mobile's Bria client to your Control Networks...

Firewall Requirements for Business VoIP

To ensure proper operation, your firewall device on the connection your handsets are using to...

Asterisk Anonymous Caller ID

In order to send private calls outbound from your Business VoIP or Wholesale trunk, you will need...